Ultraclean
Airconditioning
Hoses
Hose protection
STANDARD Hose fittings
Hose fittings / Crimp ferrules NO SKIVE
INTERLOCK Hose Fittings
Hose fittings / Ferrules LOW PRESSURE
Quick disconnect couplings
DIN/ISO Cutting ring couplings
Adaptors
Minimes couplings - Pressure gauges - Test kit - Flow blocks
Pipe clamps
SAE Flanges
Ball valves
Swivel joint
Hydraulic valves and regulators
Seals - Dustplugs and drainplugs
B-FLUID Hose crimpers & cutting
OP Hose crimpers & cutting
OP Tube processing
Other products
Femco® Aftaptechnologie
Werkplaatsbenodigdheden
»
»
CENTER JUNIOR
CENTER JUNIOR
Based on the combination of several tools, this multifunctional mobile unit allows carrying out all operations required to machining rigid hydraulic tubes: cutting, internal and external deburring, bending, pre-assembling rings according to the DIN 2353 standards, 37° flaring of rigid stainless steel (AISI 316 TI) and carbon steel (ST 37.4) rigid tubes, for 6 to 42 mm and 4 mm thick fittings complying with the SAE and JIC standards. This device is also provided with a small compressor for internal cleaning of the tubes.
Technical Features
| 24° PRE-ASSEMBLING | 6 > 42x4 mm (0.236">1.654"x0.158") |
| 37° FLARING | 6 > 42x4 mm (0.236">1.654"x0.158") |
| CUTTING | MAX Ø 100 mm (3.937") |
| BENDING | 6 > 42x4 mm (0.236">1.655"x0.158") |
| DEBURRING | MAX Ø 42x4 mm (1.654"x0.158") |
| MATERIALS | AISI 316 TI - ST 37.4 |
| DIMENSIONS L x W x H | 930x1260x1210 mm (36.614"x49.606"x47.638") |
| WEIGHT | 300 KG (660 lbs) |
| STANDARD VOLTAGE | 230V 50HZ 1PH |
| MOTOR POWER | MAX 4.6 Kw (6.2 Hp) |
| COMPRESSED AIR | 220 L/MIN. |
| SAFETY PROTECTION | incl. |
| CONTROL BOARD | incl. |
| OIL | incl. |
| TOOL HOLDER | incl. |
| SPECIAL VOLTAGE | OPTIONAL |
http://b2b.op-srl.it/images/utensili/raggi.asp
Contact
Driehoekstraat 18
4706 PR te Roosendaal
The Netherlands
+31 (0)165 85 20 50
+31 (0)165 85 20 55
